Kleemann showcases mobile crushers and screeners

First published at CONEXPO-CON/AGG - March 13, 2020

Kleeman-Mobicat MC 120 Zi Pro-3 lo resKleeman’s MOBICAT MC 120 Zi PRO jaw crusher

Kleemann is showcasing four of its latest products, including three crushers and a screener.

The MC 120 Zi PRO jaw crusher is made for challenging natural rock quarrying operations. The plant has an output of up to 650tonnes/hour, features a powerful jaw crusher with a feed opening of 1.2m x 81cm (48″ x 32″), and is equipped with an extra-long articulated crusher jaw.

To ensure the best possible material flow, the continuous feed system (CFS) adapts the conveying speed to the fill level of the crusher.

Should material bridging occur in the jaw crusher, the crusher can be reversed with the aid of the electric crusher drive to swiftly clear the blockage. The machines of the PRO line can be operated with the simple SPECTIVE control system via a 30cm (12”) touch panel, and all components and functions can be controlled from the ground.

Also on display is the mobile MOBICONE MCO 11i PRO cone crusher, which Kleemann says is the perfect secondary crushing screen of the MC 120 Zi PRO. The MCO 11i PRO has a maximum output of 470tonnes/hour. Also part of the PRO line, the crusher is designed for permanent quarrying operation.

The MOBIREX MR 130 Zi EVO2 impact crusher is designed for flexible use so that it can be transported easily and rapidly made ready for operation. The direct diesel drive concept is designed to ensure a high output while simultaneously keeping consumption low. For better capacity utilisation and productivity, the system widths of the impact crusher plant open in the direction of material flow. The plant is also operated using the intuitive SPECTIVE control concept. The overall system itself has an output of up to 450tonnes/hour.

Kleemann says the MOBISCREEN MS 952i EVO classifying screen is an ideal support unit for all three crushing systems and is suited for crushing plant contractors in both recycling and quarrying. The MS 952i EVO has a screening surface of 1.55m x 6m (5′ 1″ x 20′) and has an output of up to 499tonnes/hour. Kleemann says the high output is largely attributable to the good material flow through the plant. This starts with loading, which can be carried out both by wheeled loader and upstream crushing plant due to the generous feed hopper. The material is then transported on the extra wide feeding conveyor of 1.2m (3′ 11″) to the screen casing.

Stand S5419

Companies in this article